Set Gutenberg Block Display Based Upon Infusionsoft Contact Field Value

Specifying visibility conditions for Gutenberg block based upon Infusionsoft contact field value
Steps for specifying visibility conditions for Gutenberg block based upon Infusionsoft contact field value
  1. Locate the Contact Field section in Gutenberg editor block settings, iMember360.
  2. From the Control mode drop down ensure Individual is selected.
  3. In the dropdown select the Infusionsoft contact field to be used for the comparison.

    Click the dropdown then scroll or start typing the first characters of the contact field to aid selection.

    Click on the required contact field.
  4. In the dropdown select the comparison operator.

The comparison operators available are:

  • — i.e. None
  • Equals
  • Not equal
  • Greater than
  • Less than
  • Greater or equal
  • Less or equal
  • Begins with
  • Ends with
  • Contains
  • Not contains
  1. Specify the value to be used for comparison. When entering a date it should be specified in the format that Infusionsoft stores the date i.e. yyyymmdd
  2. Ensure the required block display to be used with this condition has been specified as detailed here:

    Set Gutenberg Block to Display Always or Never or Based Upon User Login Status

  3. Once the settings have been completed ensure Publish or Update is clicked to save the configuration.

Set any additional conditions for the block display as detailed here:

Set Gutenberg Block Display Based Upon Infusionsoft Contact Tag/Tags
Set Gutenberg Block Display Based Upon Conditional PHP Statement